9 of Our Favorite Modern Wheel Designs
Wheels are like shoes. A good set can make everything else in the ensemble pop, but ugly ones can flush loads of effort elsewhere right down the toilet. Enthusiasts love to make their cars look just so, and because wheels are so interchangeable, they’ve been among the most popular vehicle modifications for decades.
In the modern era, there are a lot of boring wheel designs, a lot of polarizing wheel designs, and then some that make you feel absolutely nothing. But occasionally, designers get the stock wheels so right that there’s no need to look to the aftermarket. Our team got to discussing what OEM (original equipment manufacturer) wheels nail the brief.
We’re not big rules people here, but we did all agree to set a time frame of 2000 to now. We covered some of the more classic designs like Minilites and Fuchs here—that conversation was all about the best wheels to come out in the last quarter century. Below are nine nominations from our staff for the best modern wheel designs. Who got it right? What’d we leave out? Who needs a wellness check based on what they offered up? Let us know in the comments.
Cadillac V-Series 10-Spoke Wheel
First introduced on the previous-generation Cadillac performance sedans, the CTS-V and the ATS-V, this 10-spoke design is fantastic. (The updated version looks nearly as good on the new CT4-V Blackwing, too.) But as cool as they are on a road car, they’re even better on Cadillac’s older, DPi-V.R IMSA race cars. A nice little brand parallel between the road and race cars lends even more credibility to just how gnarly these cars are when you thrash them. These got the vote of managing editor Eddy Eckart, and it’s not hard to see why.
Saab 9-5 Turbo 3-Spoke Wheels
Our executive editor Eric Weiner chimed in with a nod for these Saab wheels. While the now-defunct automaker had a thing for unconventional rollers, this design takes the cake. Although Saab no longer makes cars, we’ll always have an affinity for the company that took much of its design ethos from its “Born from Jets” tagline.
Mercedes-Benz SLR McLaren Fan Blades
Remember how bad wheels can sully a car’s good design? Well, sometimes the opposite is true. Great wheels can lift an otherwise, erm, interesting design. That was just the case for those nominated by editor-at-large Stefan Lombard.
“I love the smoked 15-inch Desert Runner wheels fitted to certain early 2000s Nissan Frontiers (I put a set on my Xterra) but I think I’ve got to go with the fan blades on the 2004–10 Mercedes-Benz SLR McLaren. Ironically, they are the best-looking part of the whole car.”
Cadillac Tech Bronze Snowflakes
I mean, it’s a fact that no good wheels were designed after the ’70s, but if I had to choose a modern wheel … I’ve got a thing for the wheels they’re slapping on these performance Cadillacs. (That sound you’re hearing is two of our racing experts—Cam and Eddy—in violent agreement.) The brushed satin gold/bronze tone on these things is just fantastic, and I love the amount of sidewall you still get with these wheels. — Cameron Neveu
Chevrolet Silverado HD Alcoa Aluminum Wheels
Trucks don’t usually get highly stylized wheels. It’s always function first, then form. But as resident DIY guru Kyle Smith points out, sometimes the two marry up nicely. And of course, being the wrench-master that he is, he has personal experience with these things.
“The Alcoa aluminum wheels that Chevrolet specced on the heavy-duty lineup from 2000 to 2010 have aged gracefully and are one of the rare affordable options for those looking to add some flair to their eight-lug trucks without resorting to chrome 20-inchers or painted steelies,” he says. “After finding a set locally, I had them blasted and powder-coated for a great OEM+ look. They actually helped the handling of my big red Express since the aluminum wheels are so much lighter than the factory steel ones. The ride is a lot better, which might be a low bar with an ex-plumber van, but better ride and better look? That’s about as good as it gets.”
Land Rover Defender and Ford Maverick’s Modern Steelies
Modern adaptations of vintage ideas don’t always work, but when they do, they’re pretty special. Senior editor Grace Houghton laid out a compelling case for a wheel design that we’d otherwise overlook entirely.
“I’m a huge fan of steel wheels, whether OEM or aftermarket,” said Houghton. “This pretty white one is from the Land Rover Defender, a luxury-minded off-roader, but you’ll also find them on new vehicles as humble as the Ford Maverick. Burly yet handsome, and so functional … and don’t get me started on the powder-coated steel beauties made by Detroit Steel Wheel Company … no street-rod truck would be complete without a set.”
Tesla Cybertruck Wheel Cover
We were all scratching our heads when senior editor Sajeev Mehta nominated the shoes on the Cybertruck. However, in true Sajeev fashion, he took the idea of “favorite” and pivoted it to mean “favorite wheel design to laugh at.” Score one for loose rules! Here’s his explanation: “The Cybertruck wheel covers prove that you can try to ‘Silicon Valley’ your way into reinventing the wheel, but you’re just gonna embarrass yourself in the process with a design that goes past the rim and eats into the tire.”
Alphard Wheels from Mid-2000s Mercedes-Benz SL600
Associate editor Chris Stark decided to bend the rules a different way, celebrating a wheel design not for how it looked on the car that wore it originally, but for how the design would look on other cars. It’s Friday, so we’ll allow it.
“I’m partial to the optional Alphard wheels that were available on the mid-2000s Mercedes SL,” he said. “They look fine on the cars they came on, but like the Corvette Sawblade wheels, they look way better on slammed VWs.”
Morgan Super 3 Disc Wheels
Who doesn’t love a good set of discs? They’re similar in design to the aeroblade wheels of IMSA fame, but with a smidge of functionality pulled out in favor of a little more curb appeal. Our resident U.K. correspondent, Nik Berg, had this to say about the shoes on this very British Morgan Super 3:
“They’re very big. On a very small car. Look almost like military hardware on this otherwise quite dainty oddball.”
No notes. Hard to argue with that.
Surely, there are plenty of modern wheel designs that we overlooked. Do you have a few in mind? Sound off in the comments below!
***
Check out the Hagerty Media homepage so you don’t miss a single story, or better yet, bookmark it. To get our best stories delivered right to your inbox, subscribe to our newsletters.
The Land Rover wheels remind me of Mopar wheels from the early 70s.
Loved the look of my American Racing Ansen Sprint wheels on a 66 Mustang GT. They looked very similar to the factory wheels on Opal GT’s.
The Saab wheels pic above are a knockoff of the 1st gen mr2
And best wheels imo r32 5 spoke or 6 spoke enkis commonly used on s chassis or skylines
I love chrome wheels and I think these Chevrolet SSR wheels represent the best looking OEM wheels of the past 25 years.
http://media.americantorque.com/photos/2024/03/16/IMG_20240315_183544681_HDR2_2.jpg
Chevy nailed another one with the stock wheels on the 1st gen Cruze Eco.
My C2 Corvette had a full set of 15″ International Dragmaster wheels on it when I purchased it. I want to go to 17″ wheels but want the same look in the wheel. Haven’t decided what to do yet.
My favorite for road use is the BBS REV7. https://www.bbs-usa.com/road_wheels/wheel_details.cfm?wheel=125
For race use, I like the BBS E87. https://www.bbs-usa.com/race_wheels/wheel_details.cfm?wheel=98
I prefer the REV7 for the fewer spokes, but like the E87 for the gold center/silver rim color combination. Unfortunately, BBS doesn’t offer a street wheel in the color combination of the E87.
For OEM wheels, I love the 8-lug hub/wheel combination on the ’60’s Pontiacs.
https://www.ebay.com/itm/375012193145?itmmeta=01HZANAAWDT26NGCJ3D8KKC918&hash=item575077f379:g:kh4AAOSwgMFlOVrD&itmprp=enc%3AAQAJAAAA8I9osjqKFzxO3zZfUu9FfyODIGaVR7oJ8%2FUqP7KRmBamJ27nFIcEfygPA2H26nXu6m5m8fO17qgwesFhR%2FoMCkCs2vrl787YKcBzyY7zaPVSoWkT09w6YMkxTbS%2FbnymbKoPuxqZQbANE2UWyFyK6gTH5Pd7NGRFdwmQKzKTLsS0iN7q4WRUkGKsoBSQD0lzs%2Fb17ULaFqZLasHVWMFIHJab%2FAgqUV5aEJMzXdSoemk%2FsVXLl2Yzg4IUHdfYADzmTyX3U5MfMmzxbejM8SnKmPaD6rpf5S%2B92Ym%2BH84OCkOpkdXoWF0bIAr1Z6b3kxOstg%3D%3D%7Ctkp%3ABk9SR6iuqdX6Yw
https://cdn.dealeraccelerate.com/adventure/1/254/14595/1920×1440/1961-pontiac-catalina-bubble-top
I also like the steelies for new Defenders and think its a bummer that they can’t pair with the larger brakes needed with the yummy inline six. I also love the chromed steelies used for years on the Jaguar XJ sedans and coupes. As to alloys, I was delighted to see those I love on my Chevy 2500 4×4 pickup. I also love the coupe wheels on the early BMW 2800/3.0 Si/CSi and was bummed that my later 3.0 Si had the Alpina style finned ones. Also like the similar cast alloys on the Fiat Dino, especially the centerlock version. And of course the chrome knockoff wires on older Jaguars such my much missed XK-150 FHC. The splayed bunch of bananas alloys on my XK8 not so much.
Those Maverick wheels look so plain, like an econobox; that would be the first thing I would change. And, black wheels almost always look bad – they look like old-school painted steel wheels that have lost their wheel covers. While there are many good-looking modern wheels, none of those shown above really look all that great to me.
I’m in agreement on the Chevy truck wheels. I own a ’99 Classic (carryover GMT-400) K2500 and those wheels would bolt right on. I’ve seen it done and they look good. I haven’t done it though as I am quite fond of the stock 8-bolt steel wheels my truck has. With the caps and rings they are a smart looking economical wheel. I would have included them in my list. Another that caught my eye a few years ago harkens back to the time I worked in the vintage/streetrod industry. The Jeep Patriot 16″ base model wheels from I think ’07-’17 look enough like the Halibrand style cast wheels that have made a comeback in recent years. The Jeep wheels could somewhat achieve the look on a budget. https://www.groovecar.com/research/2009/jeep/patriot/4×4-sport-4dr-suv/
Could we leave those bloody Cybertrucks out of discussions. They look like a refuge from someone’s toy box from the 90s.
LOVE the MOPAR rally wheels on our 71 road runner…
I’m not a big fan of most stock wheels. Not sure what they are considering as modern but I’m a fan of the Trans Am gta/Buick Grand National crosslace wheels. Only issue is that they’re too small. The reproduction ones are nice, they come in 17s, 18s and 19s I beleive. And what’s up with all the hate for black wheels? I love black wheels, as long as they are gloss black. I do agree, dull or matte black wheels don’t look good. I replaced the small stock 18″ wheels on my Lightning with an LMR repo, same style wheel just in a 20″ gloss black version, looks 1000x better than the boring silver wheels it came with. I don’t race the truck so I don’t mind the added weight of the 20″ wheels. I originally was gonna buy the same wheel but in chrome. I’m not a huge fan of chrome on never cars, it just looks gaudy imo. On something old, fine but I’d take gloss black over chrome anyday.
1967 15″ GM Rally Wheels. C7 Z06 Wheels.
Well to me, NOTHING is better than the 5 spoke Rally II wheel by Pontiac in ’67!
(https://www.hemmings.com/stories/article/pontiac-rally-ii)
There are of course, similar styles from Ford, Mopar & other GM brands of old.
I don’t care for all that chrome on the S/S Cragers, rather having the silver spokes with either a black or body color background.
Thanks for the article and a chance to “speak my onions.”