History Repeats Itself: TWR Returns with a Jaguar XJ-S Ready for the Road and the Track

TWR Performance

Scottish Touring Car ace Tom Walkinshaw saw great potential in the Jaguar XJ-S. Not only did he develop the car into a race-winning competitor, he later convinced Aston Martin to make use of the platform in the DB7.

Now Walkinshaw’s son Fergus, together with an eclectic team of financiers, engineers and designers, is taking the XJ-S to new heights with a remarkable restomod that’s been built to handle continental cruising and crank out blistering lap times in equal measure.

The story of this car begins in 1982, when Jaguar approached Walkinshaw to take on the XJ-S as a successor to the failed XJ-C and make some inroads into the European Touring Car Championship against rivals BMW. Having twice the cylinder count of its competitors couldn’t have hurt, but the fact that Walkinshaw made the XJ-S both fast and dependable was impressive. So impressive, in fact, that Walkinshaw and teammate Chuck Nicholson won at Brno, Czechoslovakia; Nürburgring, Germany; Silverstone, U.K, and Zolder in the Netherlands. In 1984 TWR would win the championship, including Jaguar’s first 24-hour race victory since 1957 when an XJ-S crossed the line first at Spa in Belgium. Further afield the TWR Jag also won the Bathurst 1000 in Australia.

1984 Jaguar XJS TWR 2013 Goodwood Motor Sport Press Day - 20th March
Michael Cole/Corbis/Getty Images

These successes were just the beginning of a glorious relationship with Jaguar that would see TWR build the Le Mans-wining XJR-9 of 1988, the XJR-12 which won the same event in 1990, and the road-going XJ220 and XJR-15 supercars. TWR would also go on to run race teams for Volvo in the British Touring Car championship and assemble road cars as diverse as the XJ-S-derived Aston Martin DB7 and the crazy mid-engined Renault Clio V-6.

Walkinshaw passed away in 2010, gone but never forgotten by a legion of fans the world over. It’s for them that Fergus and his team have revisited the XJ-S, transforming it from the elegant Eighties Grand Tourer into the TWR SuperCat.

“Myself and John (Kane, co-founder) were just talking about different ideas and history and thought why don’t we do something together and see if we can relaunch the brand and get it back out there, and get it back on at the forefront of automotive technology and engineering,” explains Fergus. “From that we batted around a few different ideas and eventually settled on doing the XJ-S as our first project.”

At first glance of the SuperCat it’s like seeing actor Alan Ritchson bursting out of a too-tight suit as Jack Reacher. It’s intimidating, and you wouldn’t want to get on the wrong side of it, but after the initial shock, you spot a suave edge. If you happen to see a little Aston Martin Victor in it, you won’t be the only one.

The design is a Transatlantic collaboration between Khyzyl Saleem in the U.K. and Magnus Walker in America. Walker’s role has been more advisory than hands-on, with Saleem doing the penwork. Not that he actually used a pen, of course: Saleem’s skills were honed wholly in the digital realm. Having become insta-famous for his hyper-realistic renderings of wide-bodied road and race cars, he worked on video game vehicles for Electronic Arts and then set up Live To Offend, a company specializing in body kits for the likes of the E30 and E36 BMW 3-Series and the Mazda RX-7 FD.

The SuperCat was Saleem’s first chance to design a real car from scratch and, while it was perhaps quite a risk for TWR, it was one that Walker also fully endorsed.

“Once we’d spoken to Khyzyl we went to see Magnus in California,” says co-founder John Kane. “As soon as we sat in front of Magnus he said, ‘Oh, I’d love to work with this guy in England called Khyzyl, do you know him?'”

“To be given this opportunity to work with the necessary people in order to make this car perform and to live up to its heritage, and also what we plan for the future, has been a very fun process,” says Saleem. “And genuinely it wasn’t that difficult. I was given a brief by the guys here, and my design inspiration is, in general, very ’70s and ’80s. I was just obsessed with IMSA race cars—they were so radical in their design, but in their function as well—plus super silhouettes, Japanese touring cars, British touring cars, that’s what inspires me to design.

“I pitched the V1 design, and we were all in agreement straight away that this was pretty much the direction that we wanted to head in. We’re using inspiration from the XJR-9, XJR-15, and the XJ220, which hopefully you’ll see somewhere on the car. And it all just came together. We went through thousands of hours of CFD testing and aero testing as well to make sure parts we were designing allow air to flow around the car properly.”

TWR Supercat buttress
TWR Performance

Saleem says that for him the highlight of the design was making those XJ-S trademark flying buttresses actually serve an aerodynamic purpose, helping channel the air through to the KAMM-tail rear to create serious downforce. The exact amount has yet to be measured but given that the original car was prone to lift, it’s definitely going to better.

And it will need to be, for the SuperCat is expected to be a 200-mph machine. Given that the test mule has already topped 180 mph without any of the aerodynamic advantages of the production car, this seems quite credible, and it’s all thanks to TWR’s take on the Jaguar V-12.

Only the block, cylinder heads and crankshaft are retained from the original motor. Capacity goes up from 5.3 to 5.6 liters and all internals are upgraded from the forged pistons to a new valvetrain. There’s forced induction courtesy of a centrifugal supercharger, dry sump lubrication and a cooling system with six radiators. When it left the factory the V-12 made 289 horsepower at 5500 rpm and 318 lb-ft of torque at 3000 rpm. On TWR’s dyno the revised motor delivers 670 hp at 7600 rpm and 538 lb-ft at 5350 revs.

TWR Supercat engine 2
TWR Performance

“We went with a centrifugal supercharger rather than a positive displacement supercharger because with the positive displacement, you get that big wallop of torque at the bottom end, and then it trails off. Whereas centrifugal, it’s a lot more linear power delivery,” explains Walkinshaw, who developed the powertrain himself.

The lethargic three-speed slush box is thrown out, to be replaced by a six-speed Tremec manual transmission, driving the rear wheels via an aluminum prop shaft and mechanical limited-slip differential.

Clearly that’s more than an early ’80s’ chassis could ever handle, so TWR massively stiffened it with an integral roll cage, together with new front and rear subframes. Tractive adjustable dampers are fitted to TWR’s own double-wishbone front and multi-link rear suspension. Steel or carbon ceramic brakes are offered, grabbed by six-piston front calipers and four-pot rears, and there’s a 12-way adjustable ABS system.

TWR Supercat wheel
TWR Performance

There’s an 18/19-inch wheel combo to TWR’s own design, wearing Michelin tires, with further driver aids in the form of variable electric power steering, a five-stage traction control system, five different drive modes and launch control.

Stripping away all the original body panels and replacing them with the Saleem-designed versions in carbon fiber reduces the weight by some 300 kg (660 lbs), to bring the SuperCat down to 1500 kg (3306 lbs).

There’s been no skimping on the creature comforts, however, with an all-new interior design that mimics the original gauges in a digital display, but is otherwise a world away from the donor car. Carbon-backed Sabelt seats are installed; there’s a Tilton pedal box, nicely turned metal switchgear and high-quality leather throughout, and a luggage space in lieu of the rear seats which can extend into the trunk. The brown colors and grey exterior of the first pre-production model were chosen by Walker but customers will have an unlimited palette.

So, just who are those customers? According to Kane they’re not collectors seeking to add another car to a humidity-controlled warehouse, but enthusiastic drivers wanting one bespoke car to do everything for them. “It’s a GT that you can travel to Europe and you can take all your luggage in it, but at the same time, all our background with the team and the development side is all motorsport, so it allows you to then go on track, and it’s built to withstand that, and then drive back again.”

With only 88 SuperCats to be built, quite keen pricing of £225,000 ($290,000), and several orders already in the books, it looks like TWR could once more be off to a racing start.

TWR Supercat top 2
TWR Performance

Click below for more about
Your daily pit stop for automotive news.

Sign up to receive our Daily Driver newsletter

Subject to Hagerty's Privacy Policy and Terms of Conditions

Thanks for signing up.

Leave a Reply

Your email address will not be published. Required fields are marked *