The ’80s parts-bin Ford that we almost got
When the Birmingham Motor Show opened in October 1986, there was great debate over what was the star of the event. Was it Jaguar’s new XJ40, or was it a car that was forecast to sell in much smaller numbers, but which was far more intriguing if rather less relevant: the AC Ace? The Ace prototype generated its fair share of column inches at the time, but the spotlight soon moved away from this intriguing British sports car. Now it’s all but forgotten.
The man behind the revival of the AC Ace nameplate was Brian Angliss, who had acquired the AC Cars brand in 1986, to go with Autokraft, his existing coachbuilding business and builder of continuation Cobras, among other things. In his words, with the new Ace he “took some of the best proven Ford bits and put them into an exciting 2+2 sports car package,” and with Ford’s own GN34 project recently axed, if he played his cards right he might just be able to set up a collaboration with Ford.
Things had already got off to a good start for Angliss. Senior Ford execs had taken a close look at the Autokraft Cobra Mk IV, and they were so impressed with the quality that they agreed to sell the car through Ford’s U.S. dealer network. Ford even agreed to lend a hand in the development of a new sports car in conjunction with Autokraft, which was unveiled in autumn 1986 as the Ace.
Underpinning the Ace was a chassis designed by Len Bailey, a man who was instrumental in the development of the GT40, and thereafter a stack of sports cars and racers. For the Ace he came up with an all-steel platform, over which an unstressed aluminum body shell was draped. There was an integral roll bar, and because the U.S. market would be the focus of AC’s sales, close attention was paid to crash strength.
Bailey had to dip into the Ford parts bin as much as possible, and to that end he opted for MacPherson struts at the back, taken from the Escort RS Turbo. Up front there were wishbones with single lower trailing links and concentric coil/spring damper units. The steering was borrowed from the Granada, while the ventilated discs front and rear were pinched from the Sierra RS Cosworth.
The two men behind the Ace’s styling—Roberto Giachin, an Italian, and Ed Golden, from the U.S.—were based in Ford of Europe’s Design Centre. Their job was to clothe some of Ford’s most sophisticated running gear in a modern, hand-beaten lightweight aluminum body shell created by Autokraft in its Brooklands factory.
Under that eye-catching skin was either a 150-hp, 2.8-liter V-6 or a 205-hp, turbocharged 2.0-liter four-pot (the Ace was never developed into a runner), which sent power to all four wheels via an FF Developments permanently engaged viscous-coupled transmission. This was taken straight from the Sierra Sapphire RS Cosworth, along with the Teves antilock braking tech and much of the interior switchgear and instrumentation.
Having created a stir for all the right reasons in the latter part of 1986, things started to go downhill rather rapidly. A year after it was unveiled, the Ace got the production go ahead and Angliss claimed that the first cars would be delivered in 1988. Within a couple of months that had slipped to 1989, and just a few months later AC was talking about no cars being made until at least 1990. By this point the global economy was about to go into freefall and Ford had fallen out of love with Angliss, because Autokraft was far too small to be able to keep up with the demand for Cobras from Ford’s huge dealer network across the U.S.
Ford was so unhappy with AC that between 1990 and 1992 it was reported that the American giant tried close down AC Cars on no fewer than six occasions. Somehow AC kept going, and in early 1992 an all-new sports car was unveiled, still called the Ace but sharing very little with the 1986 prototype. It was this car that would eventually evolve into the AC Ace Brooklands, which finally went into production in summer 1993. With a 5.0-liter V-8 driving the rear wheels only, and an all-new design, this was a very different beast from the car shown here.
Check out the Hagerty Media homepage so you don’t miss a single story, or better yet, bookmark it.
That is a sharp, neat little car that sounds like it has some performance potential. Too bad it never got off the ground
I would have loved to get one I graduated in 86 and didn’t have kids yes lol too bad it never made it’s debut.
forgot the photo of the Ace Brooklands Ace.
That’s so ugly it looks like a Chrysler.
Too many “What Ifs” for me in car writers minds.
First: This new comment format is not acceptable. Having to skip through multiple ads to get to this point doesn’t flow like the original format did. Fix this, please, and send whoever changed it back to Google or Microsoft so they can make someone else’s life too much fun.
Second: Did Angliss go to the Delorean School of (Not) Automobile Manufacturing? A lot of similarities in this story…
The profile shot looks like a stretched RX-7. meh.
Takes a lot from the RX-7 which Im afraid had far better styling….
Definitely looks similar to the 1st gen RX7s, especially the back glass greenhouse affect. Wonder how it looks in person rather than in pictures….
It has a very odd side profile. Not the best looking car and kind of weird.
Fugly
Interesting; I had never heard of it. That said, I would not have wanted one, as it looks rather awkwardly “sawed-off” in the back – poorly proportioned there. I agree with those who said it is reminiscent of the RX-7, except not as attractive.
Forget that one. I think its funny ford developed the cobra coupe to go racing but never used the ac aceca. Yes it already was a coupe.
Mr Angliss now lives in NZ.
Ok.
Agree with earlier poster that this new article/comments format is dumb.
I liked the old format better, even tho’ it wasn’t perfect. I want the comments on one LONG continuatino page .. links to other articles following the comments. So there.
Gees, I agree! I’ve had to point a click 600 times just to see the responses…….which most of the time I find as entertaining or even more interesting than what’s been presented by the author. Come on people!!!
Not a good looking car but nevertheless interesting to read about what could have been brought to production. I don’t think it would have sold very well anyway.
So , almost as good as a mustang ?
Almost as good as a RX-7
Almost as good as a Porsche 944?
Almost as good as a 280Z?
Almost as good as a Mitsubishi Starion?